CNC machining DFM

CNC machining DFM: what a machinist would push back on.

Upload a STEP file and Protyus plans the part the way a machinist would: how it's held, which tools reach each feature and where the design fights the process. Each finding is shown on the part, with why it matters and the change that fixes it, before the part goes out for quote.

On a real part

One clamp, two things a shop would raise.

A clamp in 6061 on a 5-axis mill: two setups, 11.8 min a part and $69.94 each at 50. Protyus raises what a shop would:

The slot. It's 3 mm wide and 60 mm deep, too deep for an end mill, so it needs a slitting saw.

The R3 corners. They match a Ø6 cutter exactly. Go slightly larger so the tool cuts them on an arc.

Findings for a machined clamp in Protyus: a slot 3 mm wide and 60 mm deep needs a saw cut, with the slot's faces picked out on the model, then the other findings, each with why it matters and the fix.
What it finds

The features that cost you, picked out on the part.

Corners and radii
Inside corners too sharp for a cutter, radii that match a cutter exactly, and fillets in sizes no standard tool has.
Walls, gaps and slots
Thin walls, deep narrow gaps, and slots too deep for an end mill.
Holes
Deep holes, flat-bottomed holes and sizes no standard drill makes.
Reach
Surfaces no tool can get to, and features that need a long tool to reach.
Beyond the findings

The whole plan, not only what's wrong.

Findings, time and cost come from one plan for the part, so they never disagree.

Setups
How the part is oriented and held, how many setups it takes and what each one does, on 3-axis, 4-axis, 3+2 and 5-axis machines, side by side.
Tooling
The tools each feature calls for, including any your shop would have to buy.
Cycle time
Time for the complete operation, setup by setup and step by step, on the machine it runs on.
Cost
A cost per part at your quantity, from material, setup, programming and run time, at your rates.
Your machines
Add your own, or start from over 30 real machine models from Haas, DMG Mori, Mazak, Makino and Okuma.
Quotes
A quote with your margin, and the PDF your customer gets.
Read next

DFM analysis

How findings are ranked, and how a DFM check leads to a cycle time and a cost.

CNC quoting software

Quote the part from the same plan, with your margin, and let customers send parts from your website.

Sheet metal DFM

The flat pattern, bend checks and cost per part for parts cut and bent from sheet.

Injection molding DFM

Wall thickness, draft and undercuts for plastic parts, judged against your resin.

AI DFM

Ask Protyus AI about a part, or connect your own agent.

Questions

What people ask.

Anything else? Email us.

What does a CNC machining DFM check look for?

What a machinist would push back on: inside corners too sharp for a cutter, thin walls, deep holes and slots, features a tool can't reach, and anything that adds a setup or a special tool. Protyus shows each one on the part, with why it matters and the change that fixes it.

How many setups will my part need?

Protyus works out how the part is oriented and held on 3-axis, 4-axis, 3+2 and 5-axis machines and shows the plans side by side, so you can see how many setups each takes and where a 5-axis machine saves one.

What inside corner radius should a machined pocket have?

Larger than the radius of the cutter that makes it, so the tool cuts the corner on an arc. A corner that matches a cutter exactly, such as R3 for a Ø6 end mill, is worth making slightly larger. Protyus picks out the corners on your part that are too sharp or an awkward size.

Does Protyus plan turned parts?

Not yet. Protyus plans milled parts on 3-axis, 4-axis, 3+2 and 5-axis machines. A part that looks like it belongs on a lathe is flagged as a lathe part, and still gets a milling plan, so read its setups, time and cost as what milling it would take.

Does it work with my machines, tools and rates?

Yes. Add your own machines, tooling and materials, or start from over 30 real machine models from Haas, DMG Mori, Mazak, Makino and Okuma. Set your labor rates and your overhead, for the whole company or for one project.

Can it quote the part too?

Yes. The same plan gives the cycle time and a cost per part at your quantity, and the cost becomes a quote with your margin and a PDF to send the customer. The pricing page says which plans save and send quotes.

See how your part will be machined.

Protyus is opening to shops, suppliers and design teams by invitation. Ask for early access, or write to us with any question.