Sheet metal DFM, with the flat pattern to prove it.
Upload a STEP file of a sheet metal part and Protyus unfolds it, checks its bends, flanges, holes and reliefs against the material, and works out whether a press brake can make it. You get the flat pattern as a DXF, the findings on the part and on its flat, and a cost per part.
From a folded model to a flat you can cut.
- Thickness and gauge
- The part's thickness as a gauge, or a finding if it isn't one thickness all over or isn't a thickness its grade is stocked in.
- Features
- Flanges, bends with their radius, angle and direction, hems, holes, slots, cut-outs, notches and reliefs, each picked out on the part.
- Flat pattern
- The part unfolded, with its size, cut length, pierces and bend lines marked up and down, to download as a DXF.
The bends, holes and forms a fabricator would question.
- Bends and flanges
- Bend radii and flange lengths the material and the tooling can make.
- Holes and cut-outs
- Holes and cut-outs too close to a bend, and the reliefs a bend needs.
- Forms and hardware
- Louvers, dimples, embosses and extrusions, hems and jogs, and self-clinching nuts, studs and standoffs.
- Bend order
- Whether a press brake can make the bends in some order, and with which punch.
- The flat
- A flat that overlaps itself, or is too big for the sheet, can't be cut, and the part says so.
- A verdict and a score
- Each finding is a Blocker, a Risk or something to consider, and the part gets a score and a verdict.
The cheapest way to make it, at your volume.
- Nest
- How many parts fit a full sheet, and how much of the sheet they use.
- Cutting processes, compared
- The part costed on a fiber laser, a CO2 laser, plasma, waterjet and a punch, with the cheapest that can make it picked.
- Time and cost per part
- Time a part over the whole route, and a cost per part at the order quantity, with setup spread over the order.
- Progressive die
- What the part costs stamped from coil, and the annual volume at which a die breaks even with cutting.
More on what Protyus does.
DFM analysis
How findings are ranked, and how a DFM check leads to a cycle time and a cost.
CNC machining DFM
What a machinist would push back on, with the setups on 3-axis to 5-axis machines.
Injection molding DFM
Wall thickness, draft and undercuts for plastic parts, judged against your resin.
AI DFM
Ask Protyus AI about a part, or connect your own agent.
Can Protyus unfold a sheet metal part from a STEP file?
Yes. It unfolds the part into its flat pattern, with the size, cut length, pierces and bend lines marked up and down, and you can download the flat as a DXF. A part whose flat overlaps itself can't be cut from one sheet, and Protyus says so.
What does a sheet metal DFM check look for?
Bend radii and flange lengths the material can make, holes and cut-outs too close to a bend, missing reliefs, forms, hems and hardware, and whether a press brake can make the bends in some order. Each finding is shown on the part and its flat, with why it matters and the change that fixes it.
Which cutting processes does it compare?
Fiber laser, CO2 laser, plasma, waterjet and punch. Protyus checks which can make the part, nests and costs it on each, and picks the cheapest that can.
When is a progressive die worth it?
Protyus prices the part stamped from coil on a progressive die beside the cutting processes, and gives the annual volume at which the die breaks even with the cheapest of them.
What if my part isn't one thickness?
Then it can't be cut and bent from one sheet as modeled, and the analysis says so. A part that should be machined can be analyzed as a machined part instead: the process is a setting on the analysis.
See how your sheet metal part will be made.
Protyus is opening to shops, suppliers and design teams by invitation. Ask for early access, or write to us with any question.